Requirements to start production of rope pumps
CONTENT OF A PRODUCTION FACILITY FOR ROPE PUMPS.
PRODUCTION OF THE WHEEL.
- Welder and its accessorius (2 x)
- Electric drill and bits
- Vice-bench.
- Pipe cutter
- Guillotine
- Scissors to cut zinc and riveting tool.
- Bending-tool for 1/2" and 3/4" pipes
- File, different types
- Hammer, sledge-hammer, saw.
- Plummet, measuring-tape, set-square, center-pons.
- Three production molds to weld the wheel with standard dimensions.
- Stock of raw materials.(Pipes, angle iron, iron rods (reinforcement rods), electrodes, etc.)
PRODUCTION OF THE PISTONS.
- High density polyethylene
- Machine to inject the polyethylene.
- Moulds of 1/2", 3/4", 1", 1½" and 2" where the polyethylene is injected in.
PRODUCTION OF THE GLAZED CERAMIC PIECE FOR THE GUIDE BOX.
- Clay
- Kiln (Temperature up to 2300 grades Fahrenheit or 1300 Celsius.)
- Containers to process the clay
- Raw material to glaze the ceramic piece
- Different uncomplicated tools
GUIDE BOX
- Molds of plate steel as shuttering to pour the concrete in.
- PVC pipes, iron wire and the ceramic piece.
- Raw material to make concrete.
- Rudimentary stove to heat and widen the ends of PVC-pipes used.
<< Previous 1 2 3 4 Next >>